NOTE
If the desired fan pressure is not reached, a
bigger hydraulic motor can help.
For more information, contact your specialist
workshop.
6.5.8 Preparing the track marker for operation
6.5.8.1 Calculating the track marker length
6.5.8.1.1 Marking at the centre of the tractor
The hydraulically actuated track markers produce
alternating marks. This mark serves as an reference
to the tractor driver for driving the next bout after
turning at the headland. The length and pitch of the
track markers are adjustable.
The track marker length L
TM
describes the distance
from the centre of the implement to the contact area
of the track marker disc at the centre of the tractor.
NOTE
6.4 m working width can only be marked in the
tractor track.
R
L
TM
CMS-I-00001215
Unit
Designation
Calculated values
N
Number of seeding
coulters
R
cm
Row spacing
L
TM
cm
Track marker length, track
marker marks at the
centre of the tractor
CMS-T-00001815-E.1
CMS-T-00001938-D.1
CMS-T-00001939-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
80
Summary of Contents for Precea 4500-2
Page 255: ......
