REQUIREMENTS
The tractor and implement are secured
1.
Remove the dust caps
1
.
2.
Unscrew and remove the central bolts
2
.
NOTE
The central bolts have different threads:
The right central bolt has right-hand thread
The left central bolt has left-hand thread
3.
Remove the cutting discs
3
.
4.
Pay attention to the number of spacer discs
4
.
5.
Replace inner scrapers
5
if worn.
6.
Install the cutting discs.
7.
Put on and tighten the central bolt.
8.
Install the dust caps.
1
2
3
4
5
220 Nm
CMS-I-00002020
10.1.10 Checking the wheel bolt tightening torque
INTERVAL
After initial operation
Every 50 operating hours
Tyres
Wheel bolt tightening
torque
Tyres 6.5/80x15-AS
325 Nm
Tyres 26x12-12 AS
325 Nm
Check the wheel bolt tightening torque.
CMS-T-00002382-D.1
10 | Repairing the machine
Maintaining the machine
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
205
Summary of Contents for Precea 4500-2
Page 255: ......
