3.
Lubricate the roller chain
1
from the inside
going out.
4.
Check chain tensioner
2
for ease of movement.
5.
Install the cover.
6.
Install the bolts.
2
1
CMS-I-00005365
10.3 Cleaning the implement
IMPORTANT
Risk of machine damage due to cleaning
jet of the high-pressure nozzle
Never direct the cleaning jet of the
high-pressure cleaner or hot water
high-pressure cleaner onto the marked
components.
Never aim the cleaning jet of high-pressure
cleaners or hot water high-pressure
cleaners on electrical or electronic
components.
Never aim the cleaning jet of the high
pressure cleaner directly on lubrication
points, bearings, rating plates, warning
signs, and stickers.
Always maintain a minimum distance of
30 cm between the high-pressure nozzle
and the implement.
Do not exceed a water pressure of 120 bar.
CMS-I-00002692
Clean the machine with a high-pressure cleaner
or a hot water high-pressure cleaner.
CMS-T-00000593-F.1
10 | Repairing the machine
Cleaning the implement
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
177
