10.1.2 Checking and replacing the cutting discs on the PreTeC mulch seeding coulter
INTERVAL
Every 100 operating hours
or
Every 3 months
1.
Determine the cutting disc diameter.
2.
If the diameter of the cutting discs is less than
360 ml:
replace the cutting discs.
3.
Remove the depth control wheel along with the
bracket
1
.
4.
Remove the dust caps
2
.
NOTE
The central bolts have different threads:
The right central bolt has right-hand thread
The left central bolt has left-hand thread
5.
Unscrew and remove the central bolts
3
.
6.
Remove worn cutting discs
5
.
7.
Unscrew and remove the bolts on the bearing
seat
6
.
8.
Replace worn cutting discs with new cutting
discs.
9.
Put on and tighten the bolts on the bearing seat.
10. Install new cutting discs.
11.
To ensure that the cutting discs touch slightly,
adjust the spacing of the cutting discs with the
spacer discs
4
.
12. Install spacer discs that are not required on the
opposite side of the cutting disc bearing with the
central bolt.
13. Put on and tighten the central bolt.
14. Install the dust caps.
CMS-I-00002044
CMS-T-00002375-F.1
10 | Repairing the machine
Maintaining the machine
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
151
