Amazone KE 3002, Original Operating Manual

Page: 82 / 120

6.6.2 Moving the extendable side guide plates in transport position
1. Insert the universal operating tool
1
on the
swivelling lever
3
.
2. Remove the linch pin
4
.
3. Hold the universal operating tool in position.
4. Open the locking mechanism
3
.
5.
To move the side guide plate into transport
position,
move the universal operating tool up.
6. Close the locking mechanism.
7. Secure the locking mechanism with the linch pin.
8. Repeat the procedure for the opposite side of the
implement.
1
4
3
2
CMS-I-00003452
6.6.3 Preparing the liftpack system for road travel
6.6.3.1 Deactivating the lift height limiter
1.
To deactivate the lift height limiter,
pull on the rope from the tractor cab
1
and hold
it.
The bolt
3
does not actuate the catch hook
2
and the lifting procedure is not interrupted.
2. Raise the lifting frame.
1 2
4
3
CMS-I-00003389
If an implement without universal joint shaft is
mounted on the liftpack system, the lift height limiter
can be deactivated.
3.
Before coupling the implement onto the liftpack
system,
the lift height limiter must be permanently
deactivated.
CMS-T-00004840-A.1
CMS-T-00004804-A.1
CMS-T-00004799-A.1
6 | Preparing the machine
Preparing the machine for road travel
MG6878-EN-II | D.1 | 18.05.2021 76