Amazone KE 3002, Original Operating Manual

Page: 60 / 120

6.5 Preparing the implement for operation
6.5.1 Manual adjustment of the tine working depth
The soil tillage implement
2
is supported by the
carrying arms of the trailing roller
1
. To adjust the
working depth, the depth setting pin
3
is inserted in
the desired hole.
1
3
2
CMS-I-00003428
1. Raise the implement.
The pins
2
are no longer resting on the carrying
arms
1
.
2. Secure the tractor and implement.
3. Remove the linch pin
3
.
Pegging position Working depth
Higher
+
Deep tillage
Lower
-
Shallow tillage
NOTE
The adjustment of the working depth must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
4. Put the pins in the desired position.
5. Secure the pin with the linch pin.
6. Make the same setting for the opposite side of the
implement.
1
3
-
+
2
CMS-I-00003426
CMS-T-00004617-B.1
CMS-T-00004626-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6878-EN-II | D.1 | 18.05.2021 54