7.1.5 Emptying the grass collector with Standard hydraulic system
7.1.5.1 Emptying the grass collector close to the ground
1.
Switch off the PTO shaft drive on the tractor.
2.
Drive the machine in reverse towards the
unloading point.
3.
Lift the grass collector using the tractor controls.
4.
Completely empty the grass collector.
5.
Completely lower the grass collector using the
tractor controls.
CMS-I-00004263
7.1.5.2 High tip emptying the grass collector
WARNING
Risk of tipping when the grass collector is
raised
Only raise the grass collector on stable
and level ground.
Never raise the grass collector on slopes
or inclines.
1.
Switch off the PTO shaft drive on the tractor.
2.
Drive the implement in reverse up to 1 m before
the unloading point.
NOTE
The maximum height for high tip emptying is 2.30
m.
CMS-T-00004711-A.1
CMS-T-00004712-A.1
CMS-T-00004713-A.1
7 | Using the machine
Using the implement with Standard hydraulic system
MG6212-EN-II | C.1 | 12.04.2021
101
