6.3.3.4 Adjusting the track marker intensity
1.
loosen the bolts
1
with the universal operating
tool.
Work application
Pitch
Light soils
Reduce
-
About parallel to the direction
of travel
Heavy soils
Increase
+
More on-grip to the direction of
travel
2.
Move the track marker disc to the desired position
by turning the track marker axis
2
.
3.
Tighten the bolts with the universal operating tool.
4.
Make the same setting for the opposite side of the
implement.
5.
After 5 hours of operation, check the bolt
connection for tight fit.
-
+
1
2
CMS-I-00001077
6.3.4 Preparing the wheel mark eradicator for operation
6.3.4.1 Adjusting the working depth of the wheel mark eradicators
IMPORTANT
Increased wear of the wheel mark
eradicator bracket
When the overload safety is triggered at
short intervals,
reduce the working depth.
Change to a wheel mark eradicator
coulter that is easy to pull.
NOTE
The adjustment of the working depth must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
CMS-T-00001726-C.1
CMS-T-00004718-B.1
CMS-T-00001486-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6214-EN-II | E.1 | 17.05.2021
52
