6.3.1.1.2 Reduce the working depth of the concave discs manually
1.
Raise the implement.
The front spacer elements
1
are relieved.
2.
To reduce the working depth,
swivel out the desired number of spacer elements
in front of the stop washer
2
.
3.
lower the implement.
The rear spacer elements are relieved.
4.
Swivel in the free spacer elements behind the
stop washer.
NOTE
Selection of the working depth depends on
different factors, e.g.:
Soil type: light to heavy, dry to wet
Forward speed
Setting
Condition of the seedbed
CMS-I-00003764
6.3.1.2 Adjust the working depth of the concave discs hydraulically
The arrow
1
shows the change in the set working
depth. The scale only serves as orientation. The
scale value does not represent the working depth in
centimetres.
To reduce the working depth of the concave
discs,
actuate the "green 1" tractor control unit
or
To increase the working depth of the concave
discs,
actuate the "green 2" tractor control unit.
1
2
CMS-I-00002447
CMS-T-00001728-B.1
CMS-T-00001482-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6214-EN-II | E.1 | 17.05.2021
47
