6.3 Preparing the implement for operation
6.3.1 Adjusting the working depth
6.3.1.1 Manually adjusting the working depth of the concave discs
6.3.1.1.1 Increase the working depth of the concave discs manually
1.
lower the implement.
The rear spacer elements
1
are relieved.
2.
To increase the working depth,
swivel out the desired number of spacer elements
behind the stop washer
2
.
3.
Raise the implement.
The front spacer elements are relieved.
4.
Swivel in the free spacer elements in front of the
stop washer.
NOTE
Selection of the working depth depends on
different factors, e.g.:
Soil type: light to heavy, dry to wet
Forward speed
Setting
Condition of the seedbed
CMS-I-00000949
CMS-T-00003184-C.1
CMS-T-00001475-C.1
CMS-T-00001727-B.1
CMS-T-00001554-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6214-EN-II | E.1 | 17.05.2021
46
