10.1.9 Checking the lower link pins
INTERVAL
Every 500 operating hours
or
Every 6 months
1.
Check the lower link pins for cracks or broken
areas.
2.
Replace the pins if there is significant wear.
10.1.10 Checking the hydraulic hose lines
INTERVAL
After initial operation
Every 50 operating hours
or
weekly
1.
Check the hydraulic hose lines for damage, such
as chafing point, cuts, tears and deformation.
2.
Check the hydraulic hose lines for leaks.
Hydraulic hose lines must not be more than 6 years
old.
3.
Check the manufacturing date
1
.
CMS-I-00000532
4.
Have any worn, damaged or aged hydraulic
hose lines immediately replaced at a specialist
workshop.
5.
Retighten loose bolted connections.
CMS-T-00004233-B.1
CMS-T-00002331-C.1
10 | Repairing the implement
Maintaining the implement
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
93
