6.3.5 Adjusting the scraper to the roller
The scrapers on the roller are set at the factory. The
scrapers can be adapted to the working conditions.
NOTE
Permitted distances
A
between the roller
element and scraper:
Wedge ring roller: 12 mm ± 2 mm
Wedge ring roller with matrix tyre profile: 13
mm ± 2 mm
Tooth packer roller: at least 1 mm
A
CMS-I-00002071
1.
Loosen the bolt
1
on the scraper
2
.
2.
Move the scraper in the elongated slot.
3.
Tighten the bolt
1
.
4.
Check the distances when the implement is
lowered.
CMS-I-00000521
CMS-T-00000076-D.1
6 | Preparing the machine
Preparing the implement for operation
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
57
