Using the implement
7
7.1 Using the implement
REQUIREMENTS
The implement is set up and adjusted for
operation
The running gear is raised into working
position
1.
Using the lower links, align the implement such
that the frame is parallel to the ground lengthwise.
2.
Drive off with the tractor.
7.2 Turning on the headlands
IMPORTANT
Damage to the soil tillage implements
If the implement is not lifted when turning,
it can result in damage to the soil tillage
implements.
Only turn the implement on the running
gear.
1.
Before turning on the headlands, lower the
running gear into transport position using the
"yellow 2" tractor control unit.
2.
When the direction of the implement matches
the direction of travel,
raise the running gear into working position using
the "yellow 1" tractor control unit.
3.
Resume work.
CMS-T-00006814-B.1
CMS-T-00006826-A.1
CMS-T-00006893-B.1
7 | Using the implement
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
69
