6.2.2 Attaching the backstop profiles for the lower links
1.
Put the backstop profiles
1
on the lower link
pins
2
.
2.
Secure the backstop profiles with the linch pin
3
.
11
22
3
CMS-I-00001219
6.2.3 Coupling the pneumatic brake system
1.
Open the cover of the coupling heads on the
tractor.
2.
Clean off any dirt from the sealing rings on the
coupling heads.
3.
Uncouple the yellow coupling head of the brake
line
1
from the empty coupling.
4.
Couple the yellow coupling head with the
coupling marked in yellow on the tractor.
5.
Uncouple the red coupling head of the brake line
2
from the empty coupling.
6.
Couple the red coupling head with the coupling
marked in red on the tractor.
7.
Route the brake lines with sufficient freedom of
movement and without chafing or pinching points.
1
2
CMS-I-00003559
CMS-T-00001398-A.1
CMS-T-00004318-D.1
6 | Preparing the machine
Coupling the implement
MG7242-EN-GB | L.1 | 26.07.2022 | © AMAZONE
46
