4.
Tighten the nut.
5.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
6.4.13 Adjusting the row spacing
For large row spacings, e.g. for seeding maize,
individual seed rows can be closed.
1.
Loosen the four knurled screws
1
.
2.
Remove the cover
2
.
1
2
CMS-I-00003190
NOTE
A maximum of 50 percent of the seed outlets may
be closed off, otherwise the seed is not deposited
in the furrow.
3.
To increase the row spacing,
use the tool
2
to install the sealing plugs
1
in
the seed outlets
or
To reduce the row spacing,
use the tool
2
to remove the sealing plugs
1
from the seed outlets.
1
2
CMS-I-00003247
CMS-T-00004489-D.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
76
