6.4.11.2 Adjusting the exact following harrow pressure
6.4.11.2.1 Adjusting the exact following harrow pressure hydraulically
The exact following harrow pressure must be adjusted
such that all seed rows are evenly covered with earth.
On heavy soils, the pressure must be higher than on
light soils.
To make adjustments, the minimum pressure and the
maximum pressure of the exact following harrow must
first be determined by mechanical pegging.
The exact following harrow pressure is then
hydraulically adjusted together with the coulter
pressure. With higher coulter pressure, higher exact
following harrow pressure is also set at the same
time.
NOTE
The adjustment of the exact following harrow
pressure must be adapted to the respective
operating conditions. The optimum adjustment
can only be determined during field operation.
1.
Take the lever
1
out of the transport lock
2
and pull it up.
2
1
CMS-I-00004673
CMS-T-00010528-A.1
CMS-T-00008781-A.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
72