7.
Take out the setting lever.
8.
Repeat the procedure on the other side.
9.
When the desired working depth has not been
reached yet,
repeat the procedure.
10. Fasten the setting lever in the parking position.
6.3.2.2 Adjusting the automatic working depth adjustment of the levelling
The working depth of the levelling is automatically
adjusted when the working depth of the coulters is
adjusted.
The working depth of the levelling relative to the
working depth of the coulters can be adjusted using 2
threaded spindles.
Default values for the threaded spindle length:
Levelling with double discs: 315 mm
Levelling with spring steel closers: 350 mm
Working depth of the levelling
Threaded spindle
increase
lengthen
reduce
shorten
1.
Slightly raise the implement.
2.
Remove the lock nut
2
.
3.
Adjust the length of the threaded spindle on the
hexagon
1
with a spanner.
4.
Tighten the lock nut.
5.
Adjust the second spindle to the same length.
1
2
CMS-I-00003061
CMS-T-00004168-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6806-EN-GB | Q.1 | 26.07.2022 | © AMAZONE
49
Summary of Contents for Cenio 3000
Page 83: ......
