9.3.8 The TwinTeC coulter is not spreading seed
The seed outlet is strongly blocked.
1.
If the blockage cannot be removed from below,
Remove the hose
4
.
2.
Remove the bolt
5
.
3.
Remove the seed outlet
1
.
4.
Clean the seed outlet.
5.
To install the seed outlet,
place the guides
2
in the coulter bodies
3
.
6.
Install the bolt.
7.
Install the hose.
2
3
4
5
1
6 Nm
CMS-I-00003246
9.4 Cleaning the machine
IMPORTANT
Risk of machine damage due to cleaning
jet of the high-pressure nozzle
Never direct the cleaning jet of the
high-pressure cleaner or hot water
high-pressure cleaner onto the marked
components.
Never aim the cleaning jet of high-
pressure cleaners or hot water high-
pressure cleaners on electrical or
electronic components.
Never aim the cleaning jet of the high
pressure cleaner directly on lubrication
points, bearings, rating plates, warning
signs, and stickers.
Always maintain a minimum distance
of 300 mm between the high-pressure
nozzle and the machine.
Do not exceed a water pressure of 120
bar.
Clean the machine with a high-pressure cleaner
or a hot water high-pressure cleaner.
CMS-T-00006601-A.1
CMS-T-00000593-C.1
9 | Repairing the machine
Cleaning the machine
MG6545-EN-II | B.1 | 22.07.2021
106
