Managing the field boundaries
R
1
Creating the field boundary
The AmaTron 4 can create a field boundary from the
worked area. The AmaTron 4 can calculate the size of
the field from the field boundary. The worked area and
the remaining area result from the field size.
REQUIREMENTS
Completely work the field edge
In the Work menu, select
.
The field boundary is laid around the worked area.
The sizes of the worked areas and the remaining
areas are shown on the map:
1
CMS-T-00001745-A.1
CMS-T-00000298-B.1
R | Managing the field boundaries |
MG6010-EN-GB | G.1 | 13.12.2018
82
Summary of Contents for AmaTron 4
Page 2: ......