3. In the menu for selecting the field data, select
.
The application maps saved on the USB flash drive
are displayed
4. Select the desired application map.
5.
To adjust the units for the application rate,
select
"Unit"
.
6.
To scale the application rate by a specific value,
select
"Scale values"
.
7. Confirm entries with
.
The selected application maps are included in the
field data under
"Jobs"
. The selected field
boundaries are included in the list of field
boundaries.
5
Creating a new job
When a field was created or imported using job data,
jobs can be created and the field can be assigned to a
job.
REQUIREMENTS
The job data is imported, see page 63 or the field
is created, see page 62
CMS-T-00000326-C.1
P | Working with documentation | Creating a new job
MG6010-EN-GB | G.1 | 13.12.2018
66
Summary of Contents for AmaTron 4
Page 2: ......