Working without documentation
O
1
Creating a new field
Without documentation, the AmaTron 4 saves the
recordings however, the recordings are deleted if a new
field is created. Part-width section control and the track
lines can be used without managing field data or job
data.
If a field has been worked and the current recording is
available, a new field must be created on the AmaTron 4
to be able to work a different field.
The recordings include the following data:
Worked area
Field boundaries
Obstacles
Headlands
Track lines
1.
If current recordings are available,
select
in the Work menu.
2.
To start the recording,
CMS-T-00000240-C.1
CMS-T-00000266-C.1
O | Working without documentation |
MG6010-EN-GB | G.1 | 13.12.2018
61
Summary of Contents for AmaTron 4
Page 2: ......