7. Diminish the map with your fingers to the lowest
desired zoom level.
8. select
.
NOTE
As long as autozoom is activated, the zoom levels can
be adjusted at any time.
5
Defining the map layers
The following layers can be shown or hidden on the
map:
Coordinate network
Worked area
Application map
1. In the map view, select
.
2. Select the desired map layer.
CMS-T-00000358-B.1
N | Map view configuration | Defining the map layers
MG6010-EN-GB | G.1 | 13.12.2018
60
Summary of Contents for AmaTron 4
Page 2: ......