4.
To zoom the map back to the standard dimensions
and to focus on the vehicle symbol,
press
.
5
Panning the map
The map is zoomed and panned with the directional
pad. The GPS switch menu shows which of the two
functions is currently active:
: Zoom
: Map panning
1.
If the zoom is active:
Select
.
The symbol for map panning is shown:
.
2. Pan the map using the directional pad.
3.
To focus on the vehicle symbol and zoom the map
back to the standard dimensions,
press
.
6
Turning around the orientation of the tractor symbol
If the orientation of the tractor symbol on the map does
not correspond to the direction of travel of the tractor, the
vehicle symbol can be turned around manually. The driv-
ing direction is determined through the tractor or the
GPS signal, see page 81. The symbol is only shown
when the signal is evaluated by the GPS. If a signal is
available from the tractor, the symbol will not be shown.
006940
014051
K | Using the GPS switch| Panning the map
MG5560-EN-II
| B.1 | 2016.07
92
