1. In the GPS switch settings, check the values for the
"Switch-on time"
and for the
"Switch-off time"
.
2.
If the switching times are not correct,
change the switching times in the implement con-
trols.
4
Zooming the map
The map is zoomed and panned with the directional
pad. The GPS switch menu shows which of the two
functions is currently active:
: Zoom
: Map panning
1.
When map panning is active:
Select
.
The symbol for zooming is shown:
.
2.
To zoom the map in small increments,
press
and
.
3.
To zoom the map in larger increments,
press and .
009642
K | Using the GPS switch| Zooming the map
MG5560-EN-II
| B.1 | 2016.07
91
