2. Select a vehicle from the list.
3. Confirm selection with
.
A restart must be performed for some vehicles.
4. Confirm restart with
.
The
"Vehicle geometry"
menu will be shown.
5.
To change the vehicle geometry,
4.2.1 Importing vehicle data
Vehicle data that was saved to a USB stick using the
inventory manager can be imported again.
NOTE
For more information on the inventory manager, see
page 216.
1. In the setup menu, tap on
"Vehicle"
>
"Select"
.
2. Tap on
.
3. Select a vehicle from the list.
4. Confirm selection with
.
A restart must be performed for some vehicles.
5. Confirm restart with
.
The
"Vehicle geometry"
menu will be shown.
001557
F | Configuring the AMAPAD | Configuring a vehicle
MG5574-
EN
-II | B.1 | 25.10.2016
76
