AMATECH F-ASLWF, Instructions For Use Manual, Page: 14 / 145

INSTRUCTIONS FOR USE
Document Number: 80028288
Page 14
Issue Date: 27 MAR 2020
Version: B Ref Blank Template: 80025118 Ver. E
4.2 Product Specifications:
Note: Consult the corresponding IFU for the products mentioned in the above table.
4.3 Sterilization Instruction:
This device is not intended to be sterilized. Equipment damage may occur.
4.4 Cleaning and Disinfection Instruction:
WARNING:
 Do not use bleach or products that contain bleach to clean the device. Injury or
equipment damage can occur.
 After each use, clean the device with alcohol-based wipes.
 Do not put the device into water. Equipment damage can occur.
 Use a cloth and a quaternary ammonium disinfecting/cleaning solution to clean
and disinfect the device.
 Read and follow the manufacturer’s recommendation for low-level disinfection.
 Read and follow the cleaning product’s instructions. Use caution in areas where
liquid can get into the mechanism.
 Wipe the device with a clean, dry cloth.
 Make sure that the device is dry before you store it or use it again.
Mechanical Specifications Description
Product Dimensions
Adjust vertically from 22” to 30”
(56 cm x 76.2 cm)
Material Stainless Steel, nylon, Aluminum
Safe Working Load on the device 5 lbs. (2.3 kg)
Overall Weight of Complete Device Approx. 5 lbs. (2.3 kg)
Storage Specifications Description
Storage temperature -29
ᵒ
C to +60
ᵒ
C
Storage Relative humidity range 15% to 85%
Operating temperature
This device is intended to be used in a controlled
Operating Room environment.
Operating Relative humidity range
Electrical Specifications Description
Not Applicable. Not Applicable.
Software Specifications Description
Not Applicable. Not Applicable.
Compatibility Specifications Description
Operating Room Table compatibility
This Device is compatible with the following
rail styles: US Rail