Amanda Amanda@Work.Place Version 3.xx, Installer'S Manual

Page: 193 / 206

Appendix C: Configuration Reference 185
did_mode Indicates whether Amanda is using DID.
True or False. The default is False.
When True, Amanda expects a DID interface (such as EXACOM) that processes a hook-
flash as battery reversal.
When False, Amanda does not expect a DID interface.
The default appears in install.cfg as:
set did_mode false
n_ani The number of Automatic Number Identification (ANI) digits to be read by Amanda be-
tween the first and second wink in a 2-wink T1 environment.
The default is 0. The range is 0-255.
In a 2-wink T1 environment, Amanda may receive more digits than the Rhetorex buffer
can hold. So Amanda reads up to n_ani digits between the first and second winks and
starts processing them as part of the regular inband integration. After the second wink,
Amanda reads the remaining digits.
See also t1_mode and n_winks.
The default appears in install.cfg as:
set n_ani 0
n_winks If t1_mode is True, tells whether the environment is an immediate (0-wink), 1-wink, or
2-wink environment.
Number from 0 to 2. The default is 1. When 2, you need to set n_ani.
See also t1_mode and n_ani.
The default appears in install.cfg as:
set n_winks 1
ring_mode Indicates whether Amanda expects a loop start or a DID interface line.
True or False. The default is True.
When True, Amanda expects a loop start line, and new calls are indicated by ring volt-
age.
When False, Amanda expects a DID interface line, and new calls are indicated by loop
current.
The default appears in install.cfg as:
set ring_mode true
t1_mode Indicates whether Amanda is to use a T1 line.
True or False. The default is False.
When True, Amanda expects a T1 line and can process it using a Rhetorex 24000 board.
When False, Amanda does not expect a T1 line.
The default appears in install.cfg as:
set t1_mode false
T1/DID Options (Continued)
Configuration Option Description