Amanda Amanda@Work.Place Version 3.xx, Installer'S Manual

Page: 179 / 206

Appendix C: Configuration Reference 171
record_menu Controls Amanda’s use of prompts and menus before and after recordings.
True or False. The default is True.
When True, Amanda checks the values of begin_rec_prompt and end_rec_menu to de-
termine what to say.
When False, Amanda does not prompt the caller to leave a message at the tone nor the
user to record a greeting at the tone. She also does not play the post-record menu that
allows the caller or user to review and re-record.
The default appears in install.cfg as:
set record_menu true
rmt_rna In a notification record, when using W(0,P) or W(0,V) to wait for a pager or voice an-
swer, the number for this option replaces the 0 and provides the number of remote rings
that Amanda must hear before she decides that there is no answer.
The default is 4. The range is 1 to 9.
The default appears in install.cfg as:
set rmt_rna 4
rotary Controls the detection of rotary digits.
True or False. The default is False.
When True, Amanda detects rotary digits.
When False, Amanda does not detect rotary digits.
N
OTE
: Only rotary digits 3(9 and 0 are currently detected on the Rhetorex 2132 and 4132 boards.
Therefore, if you plan to use this feature, make sure that all your mailboxes exclude the
digits 1 or 2. Also, there are no * and # signs on rotary phones, therefore setting this to
True introduces additional delays when the system detects the dialed number. For full ro-
tary detection, please contact your Amanda Sales Representative for other options.
N
OTE
: The Rhetorex 232 and 432 boards do not support rotary detection. If rotary detection is
required, use Rhetorex 2132 and 4132 boards.
N
OTE
: The 727 Rhetorex drivers (shipped with Amanda version 6.02) does not support rotary.
You can switch to the 537 drivers. First save VOICECNF.EXE as VOICECNF.727 and
RHETDRV.EXE as RHETDRV.727. Then copy VOICECNF.537 to VOICECNF.EXE
and RHETDRV.537 to RHETDRV.EXE. These files are in C:\PLATFORM.
The default appears in install.cfg as:
set rotary false
screen_save The file in the C:\AMANDA directory in which screen traces are saved. Whenever you
use screen trace, the data is saved to the designated file. Otherwise, the data appears only
on the screen.
The default filename is SCREEN.OUT.
The default appears in install.cfg as:
set screen_save 'screen.out'
sec_code_display Controls whether security codes are visible from the User screen.
True or False. The default is False.
When True, the security codes are visible.
When False, they are replaced by asterisks.
The default appears in install.cfg as:
set sec_code_display false
security_min_length The minimum length of a user’s security code when changed by a user over the tele-
phone. This does not affect the length of security codes that are entered from Amanda.
The administrator can use any password of 8 or fewer characters.
A number from 1 to 8. The default is 1.
The default appears in install.cfg as:
set security_min_length 1
General Options (Continued)
Configuration Option Description