Amanda Amanda@Work.Group/DOS, Administrator'S Manual

Page: 114 / 264

104 Administering Amanda@Work.Group/DOS
4. Type the last number in the range of DNs in the Highest Directory Num-
ber text box. Then press Enter.
A messages informs you, “Dialing Sets. Screen will blank for xxx sec.
Press Enter to continue.”
5. Press Enter.
A message informs you, “Updated Set Names. Press Enter to continue.”
N
OTE
: The Autocreate request can take a while because only
one port (which might not be available immediately)
can perform the request. Amanda logs information
about the new mailboxes in the trace file.
If you see the message, “Failed to update Set Names.
Press Enter to continue,” Amanda was unsuccessful.
Refer to trace.out for further information.
If you see the message, “One or more Set Names could
not be updated. Press Enter to continue,” Amanda was
partially successful. Some of the extensions dialed
were identified successfully; others failed. Refer to
trace.out for further information.
If you delete a mailbox and then run the Autocreate
Process, the mailbox is re-created by the Autocreate
Process if it corresponds to an existing extension.
Creating an Informational Mailbox
Some mailboxes give out information to callers or instruct callers about
their options. Creating a mailbox to perform such a task is a matter of
creating a mailbox with the right values in the right fields.
The proper settings for the standalone system are:
Extension: blank
Dir Name 1: blank
Dir Name 2: blank
Do Not Disturb: ON