8
Cookware
Characteristics
Earthenware
■
Follow manufacturer’s instructions.
■
Use on low heat settings.
■
May scratch the cooktop.
Porcelain
enamel-on-steel
or cast iron
■
See stainless steel or cast iron.
■
Porcelain enamel bakeware without the
metal base may bond to the cooktop if
overheated.
Stainless steel
■
Heats quickly, but unevenly.
■
A core or base of aluminum or copper
on stainless steel provides even heating.
Use flat-bottomed cookware for best cooking results and energy
efficiency. The cookware should be about the same size as the
cooking area outlined on the cooktop. Cookware should not
extend more than
1
/
2
" (1
.
3
c
m) outside the area.
Home Canning
Canning can be performed on a glass smoothtop cooking surface
or traditional coil element cooktop. When canning for long periods,
alternate the use of surface cooking areas or elements between
batches. This allows time for the most recently used areas to cool.
■
Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than
1
/
2
" (1
.
3
c
m) beyond the surface cooking area
or element.
■
Do not place canner on 2 surface cooking areas or elements
at the same time.
■
On ceramic glass models, use only flat-bottomed canners
to avoid damage to the cooktop and elements.
■
For more information, contact your local agricultural extension
office or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
OVEN USE
Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
IMPORTANT:
The health of some birds is extremely sensitive
to the fumes given off. Exposure to the fumes may result in
death to certain birds. Always move birds to another closed
and well-ventilated room.
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss.
Press OFF/CANCEL to clear. When oven is not in use, the time of
day is displayed. Indicator lights show functions that are in use.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One Tone
■
Valid keypad press
■
Oven is preheated (long tone).
■
Function has been entered.
■
Reminder, repeating every 20 seconds after the
end-of-cycle tones
Three Tones
■
Invalid keypad press
Four Tones
■
End of cycle
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
To change:
Press and hold the Temp/Time “up” arrow keypad
for 5 seconds. “°C” or “°F” will appear on the display. Repeat to
change back.
To exit mode, press OFF/CANCEL.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
To change:
Press and hold OVEN LIGHT for 5 seconds.
Repeat to change back.
To exit mode, press OFF/CANCEL.
Demo Mode
IMPORTANT:
This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
To change:
Press OFF/CANCEL, OFF/CANCEL, the Temp/Time
“up” arrow keypad, TIMER SET•OFF. Repeat to change back and
end Demo mode.
09-Nov-2017 15:22:46 EST | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
