background image

March 2006

IO-291

 

Thru-the-Wall

Room Air Conditioner

with optional Electric Heat

Installation Instructions

and Owner’s Manual

This manual must be left with the owner

of the equipment.

ATTENTION INSTALLING PERSONNEL

As a professional installer you have an obligation to
know the product better than the customer.  This
includes all safety precautions and related items.

Prior to actual installation, thoroughly familiarize
yourself with this Instruction Manual. Pay special
attention to all safety warnings. Often during
installation or repair it is possible to place yourself
in a position which is more hazardous than when
the unit is in operation.

Remember, it is your responsibility to install the
product safely and to know it well enough to be able
to instruct a customer in its safe use.

Safety is a matter of common sense...a matter of
thinking before acting. Most dealers have a list of
specific good safety practices...follow them.

The precautions listed in this Installation Manual
are intended as supplemental to existing practices.
However, if there is a direct conflict between existing
practices and the content of this manual, the
precautions listed here take precedence.

RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.

Contents

IMPORTANT NOTE TO THE OWNER ........................... 2
IMPORTANT NOTE TO THE SERVICER ....................... 2
Unit Features ................................................................ 2
Transportation Damage .............................................. 2
Unpacking The Unit ..................................................... 2
Parts Supplied ............................................................. 2
Unit Accessories ........................................................... 3
Operating Instructions ................................................. 3
Installation Instructions ............................................... 3
Wiring ........................................................................... 6
Unit Operation ............................................................. 6
Preventative Maintenance .......................................... 8
Normal Operating Sounds and Conditions ................ 9
Obtaining Service ........................................................ 9
Warranty ..................................................................... 10

WARNING

HIGH VOLTAGE!
Disconnect ALL power before servicing
or installing. Multiple power sources may
be present. Failure to do so may cause
property damage, personal injury, or death.

Get user manuals: 

See SafeManuals.com

 

 

Summary of Contents for PBC123B00











Reviews: