5151 San Felipe Suite 500 • Houston, TX 77056
www.goodmanmfg.com • www.amana-hac.com
©
2019
Goodman Manufacturing Company, L.P.
IOG-2022
05/2019
is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.
I
NSTALLATION
I
NSTRUCTIONS
FOR
*MEC80* & *CEC80
G
AS
F
URNACE
(Type FSP CATEGORY I Direct
or Non Direct Vent Air Furnace)
(Type FSP CATÉGORIE I Direct
ou four á air souffl é non direct)
These furnaces comply with requirements
embodied in the American National Standard
/ National Standard of Canada ANSI Z21.47·C-
SA-2.3 Gas Fired Central Furnaces.
Installer:
Affi x all manuals
adjacent to the unit.
A
s a professional installer you have an obligation to know
the product better than the customer. This includes all safety
precautions and related items.
Prior to actual installation, thoroughly familiarize yourself
with this Instruction Manual. Pay special attention to all
safety warnings. Often during installation or repair it is
possible to place yourself in a position which is more
hazardous than when the unit is in operation.
Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking
before acting. Most dealers have a list of specifi c good
safety practices...follow them.
The precautions listed in this Installation Manual are
intended as supplemental to existing practices. However,
if there is a direct confl ict between existing practices and
the content of this m
anual, the precautions listed herein
take precedence.
TABLE OF CONTENTS
Safety Considerations ..................................................... 2
Product Application .......................................................... 4
Location Requirements & Considerations ....................... 5
Combustion & Ventilation Air Requirements .................... 8
Exterior Masonry Chimneys .......................................... 10
Electrical Connections ................................................... 13
Gas Supply and Piping .................................................. 14
Circulating Air ................................................................ 17
Electrical ........................................................................ 17
Circulating Air & Filters .................................................. 24
Airfl ow Tables ................................................................ 28
Wiring Diagram .............................................................. 45
Maintenance .................................................................. 46
Before Leaving an Installation ....................................... 46
Repair and Replacement Parts ..................................... 47
O
NLY
PERSONNEL
THAT
HAVE
BEEN
TRAINED
TO
INSTALL
,
ADJUST
,
SERVICE
OR
REPAIR
(
HEREINAFTER
, “
SERVICE
”)
THE
EQUIPMENT
SPECIFIED
IN
THIS
MANUAL
SHOULD
SERVICE
THE
EQUIPMENT
. T
HE
MANUFACTURER
WILL
NOT
BE
RESPONSIBLE
FOR
ANY
INJURY
OR
PROPERTY
DAMAGE
ARISING
FROM
IMPROPER
SERVICE
OR
SERVICE
PROCEDURES
. I
F
YOU
SERVICE
THIS
UNIT
,
YOU
ASSUME
RESPONSIBILITY
FOR
ANY
INJURY
OR
PROPERTY
DAMAGE
WHICH
MAY
RESULT
. I
N
ADDITION
,
IN
JURISDICTIONS
THAT
REQUIRE
ONE
OR
MORE
LICENSES
TO
SERVICE
THE
EQUIPMENT
SPECIFIED
IN
THIS
MANUAL
,
ONLY
LICENSED
PERSONNEL
SHOULD
SERVICE
THE
EQUIPMENT
. I
MPROPER
INSTALLATION
,
ADJUSTMENT
,
SERVICING
OR
REPAIR
OF
THE
EQUIPMENT
SPECIFIED
IN
THIS
MANUAL
,
OR
ATTEMPTING
TO
INSTALL
,
ADJUST
,
SERVICE
OR
REPAIR
THE
EQUIPMENT
SPECIFIED
IN
THIS
MANUAL
WITHOUT
PROPER
TRAINING
MAY
RESULT
IN
PRODUCT
DAMAGE
,
PROPERTY
DAMAGE
,
PERSONAL
INJURY
OR
DEATH
.
Cancer and Reproduc
Ɵ
ve Harm
-
www.P65Warnings.ca.gov
PROP 65 WARNING
FOR CALIFORNIA CONSUMERS
0140M00517-A
WARNING
RECOGNIZE THIS SYMBOL
AS A SAFETY PRECAUTION.
*
NOTE:
Please contact your distributor or our website for
the applicable Specifi cation Sheet referred to in this manual.
