Amana AE Installation Instructions Manual Download Page 1 | Manualshive

Page: 1 / 24

background image

THROUGH THE WALL ROOM AIR CONDITIONER

WITH OPTIONAL ELECTRIC HEAT

I

NSTALLATION

I

NSTRUCTIONS

ATTENTION INSTALLING PERSONNEL

As a professional installer you have an obligation to know the product better than the customer.
This includes all safety precautions and related items.

Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay spe-
cial attention to all safety warnings. Often during installation or repair it is possible to place
yourself in a position which is more hazardous than when the unit is in operation.

Remember, it is

your

responsibility to install the product safely and to know it well enough to be

able to instruct a customer in its safe use.

Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list
of specific good safety practices...follow them.

The precautions listed in this Installation Manual are intended as supplemental to existing prac-
tices. However, if there is a direct conflict between existing practices and the content of this
manual, the precautions listed here take precedence.

©

2010, 2012-2014, 2017-2018

Goodman Company, L.P.

is a registered trademark of Maytag Corporation or its related companies and is used

under license to Goodman Company, L.P., Houston, TX. All rights reserved.

www.amana-ptac.com

IO-749F
February 2018

RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.

1
2
3
...
»

Summary of Contents for AE

























Reviews:

No comments

Related manuals for AE

Brand: Daikin Pages: 17

INNOVA HTWS026INNR32-EXT

Brand: HTW Pages: 22

Brand: RollSeal Pages: 44

EPFX HEPA375VSC

Brand: EnviroPureFX Pages: 4

Brand: GE Pages: 36

Brand: Vaillant Pages: 48

Brand: Daikin Pages: 17

Brand: Rasonic Pages: 20

Brand: GE Pages: 48

CO2 Conveni-Pack

Brand: Daikin Pages: 80

Brand: AERMEC Pages: 12

Brand: Daikin Pages: 46

Brand: Friedrich Pages: 15

Brand: ICP Pages: 19

Brand: Technibel Pages: 27

Brand: Fortress Technologies Pages: 16

Brand: Daikin Pages: 26

CellarPlus 70-S1/S3

Brand: J&M Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands