6
SURFACE UNDER COOKTOP (on some models)
The coil cooktop will lift up to provide easy access for cleaning
beneath. Lift the cooktop by both front corners until the support
locks into place.
Cleaning Method:
�
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad.
�
Affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the Quick Start Guide for contact information.
To avoid damage to the range, do not remove the cooktop.
OVEN RACKS
Cleaning Method:
�
Steel-wool pad
�
For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide
�
Dishwasher (steam rack water reservoir only, not racks):
Although the water reservoir is durable, it may lose its shine
and/or discolor when washed in a dishwasher
STORAGE DRAWER OR WARMING DRAWER (on some
models)
Check that storage drawer or warming drawer is cool and empty
before cleaning.
Cleaning Method:
�
Mild detergent
OVEN CAVITY
Depending on your model, use AquaLift
®
Technology or Self-
Clean cycle regularly to clean oven spills.
Do not use oven cleaners
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain. Staining, etching, pitting,
or faint white spots can result.
Cleaning Method:
�
Clean cycle: See “Clean Cycle” first.
INSTALLATION INSTRUCTIONS
REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
�
Tape measure
�
Flat-blade screwdriver
�
Phillips screwdriver
�
Level
�
Hammer
�
Hand or electric drill
�
Wrench or pliers
�
Marker or pencil
�
Flashlight
�
Torque Wrench
�
Masking tape
�
1/4" (6.4 mm) drive ratchet
�
1/4" (6.4 mm) nut driver
�
3/8" (9.5 mm) and 5/16"
(8 mm) nut driver
�
1/8" (3.2 mm) drill bit (for
wood floors)
�
Tin snips or large wire
cutters (for cutting ground
strap if necessary)
Parts supplied
Check that all parts are included.
�
3 - 10-32 hex nuts (attached to terminal block)
�
3 - Terminal lugs
A. Anti-tip bracket
B. #12 x 1
5
⁄
8
" (41 mm) screws (2)
�
Anti-tip bracket must be securely mounted to floor or wall.
Thickness of flooring may require longer screws to anchor
bracket to floor.
Parts needed
If using a power supply cord kit:
�
A UL listed power supply cord kit marked for use with ranges.
The cord should be rated at 250 V minimum, 40 A or 50 A that
is marked for use with nominal 1
3
⁄
8
" (3.5 cm) diameter
connection opening and must end in ring terminals or open-
end spade terminals with upturned ends.
�
A UL listed strain relief.
Check local codes. Check existing electrical supply. See the
appropriate “Electrical Requirements” section.
It is recommended that all electrical connections be made by a
licensed, qualified electrical installer.
NOTE:
Be sure to purchase only Whirlpool factory-certified parts
and accessories for your appliance. Your installation may require
additional parts. To order, refer to the contact information
referenced in your Quick Start Guide.
