Safety
RMH1000M
Safety at All Times!
You, the operator, can help avoid accidents
or injury by observing the precautions in
this section and insisting that others
working for or with you also follow them.
•
Do NOT attempt to operate this
equipment under the influence of drugs
or alcohol, or prescription/over-the-
counter drugs that may cause
impairment.
•
This equipment is dangerous to
children and persons unfamiliar with its
operation. They should never be
allowed to operate this machinery or
remain in its vicinity while in operation.
•
Only a trained operator familiar with this
machinery and trained in its operation
should be allowed to operate this
machine. Do NOT allow any person to
operate or perform maintenance on this
machine until he or she has read this
manual and understands the safety
precautions.
•
To prevent injury or death, use a tractor
equipped with a Rollover Protective
System (ROPS).
•
NEVER exceed the limits of a piece of
machinery. If its ability to perform a job
safely is in question, DO NOT TRY TO
DO THAT JOB.
Look for the Safety Alert Symbol!
The Safety Alert Symbol indicates a potential
safety hazard to personnel and that extra
precaution must be taken. When you see this
symbol on the machine, remain alert and
carefully read the message that follows it.
ALWAYS follow the recommended
precautions and safe operating procedures
accompanying this symbol. If you have any
questions, please contact your dealer or the
manufacturer.
Safety Signal Words Used
Three safety signal words are used on the
machine and in this manual to indicate the
degree or level of hazard seriousness. These
three words are:
DANGER
Indicates an imminently hazardous situation
that, if not avoided, will result in death or
serious injury. This signal word is to be
limited to the most extreme situations,
typically for machine components that, for
functional purposes, cannot be guarded.
WARNING
Indicates a potentially hazardous situation
that, if not avoided, could result in death or
serious injury, and includes hazards that are
exposed when guards are removed. It may
also be used to alert against unsafe practices.
CAUTION
Indicates a potentially hazardous situation
that, if not avoided, may result in minor or
moderate injury. It may also be used to alert
against unsafe practices.
Safety Decals
•
Replace any CAUTION, WARNING,
DANGER, or instruction safety decal
that is not readable or is missing.
•
Do NOT paint over, remove, or deface
any safety sign or warning decals.
Shields
•
Certain photographs or illustrations in
this manual may show a safety shield
removed. However, NEVER operate
this machine without all shields
correctly in place!
•
If a shield must be removed to make a
repair or adjustment, replace the shield
prior to use.
2
05/29/15
MAN137
Summary of Contents for RMH1000M
