Amada ML-9011A, Operation Manual, Page: 75 / 125

Chapter
10
71
ML-9011A
10.1 QR Code Specifications
■
Examples of Preparing Data Elements
Refer to the following examples when creating data elements (figure data) other than the samples.
･
Use 11001 to 11100 as figure numbers.
･
“Margin” is required only if [Invert: YES] is selected.
･
Selectable whether or not “Position Detection Pattern” is used.
Example 1
Cell (Example: Height = Width = 100)
Register figure data based on a figure symmetrical relative to the origin, as shown below.
Example 2
Cell for marking dots (Example: Height = Width = 100)
Register figure data so that the laser beam is emitted for 0.001 second (1 ms) at the origin, as shown
below.
Y
X
100, 100
100, -100
-100, 100
-100, -100
Y
X
100, 100
100, -100
-100, 100
-100, -100
dot