Amada ML-7 Series, Operation Manual, Page: 42 / 93

Chapter
4
38
ML-7 Series/ML-9001A
Chapter 4 Maintenance
2
To remove the fixtures holding the filter
in place, spread the four ends of the
fixtures (circled in the figure) in the
directions shown by the arrows.
3
Remove the air filter from the cover.
Clean the filter with a neutral detergent
and allow it to dry completely.
4
Attach the air filter to the front cover.
Insert the center part of the fixtures
(shown inside squares in the figure).
Secure the air filter in the fixtures.
5
Attach the front cover to the Control Unit.
■
ML-7064A
1
Pull out the air filter cover at the front of the Control Unit.
2
To remove the fixtures holding the filter
in place, spread the four ends of the
fixtures (circled in the figure) in the
directions shown by the arrows.
3
Remove the air filter from the cover.
Vacuum the air filter to clean it.
4
Attach the air filter to the front cover.
Insert the center part of the fixtures
(shown inside squares in the figure).
Secure the air filter in the fixtures.
Air filter
Fixture
Front cover
Air filter
Fixture
Air filter cover