Amada ML-7 Series, Operation Manual, Page: 2 / 93

■
Organization of This Manual
This documentation for the LD-pumped laser marker covers installation, operation, maintenance, and
specifications. The documentation is organized as follows. Refer to each manual as needed.
For marking in LMDraw6 using a computer, refer to the manual for LMDraw6.
Specifications
Information about marker features, system configuration (constituent parts, accessories, and options),
specifications, and interface specifications.
Installation/Maintenance (this manual)
Instructions from unpacking to installation, including safety precautions and service and maintenance
procedures.
Operating Unit
Instructions for marking from the Operating Unit touch panel.
■
Notes
•
This documentation is intended for ML-7 series (ML-7111A/7112AH/7064A) and ML-9001A
markers. Figures and screenshots are based on the ML-7111A, unless information for other
markers is significantly different.
•
Unauthorized reproduction of this manual in whole or in part is prohibited.
•
The contents of this manual are subject to change without notice.
•
Every effort has been made to ensure the accuracy of this manual, but if you notice oversights or
errors, please notify your dealer.
•
Be sure to read the user's manuals for any equipment used in conjunction with the system (e.g.,
documentation for computer systems).
•
This system incorporates a QR code engine developed by Denso Wave Inc.
•
Graphics rendering support in LMDraw6 (for importing DXF data) is provided by CADBuilderOCX,
developed by Knack SoftWare Inc.
■
Trademarks
•
Microsoft, Windows, and OpenType are trademarks or registered trademarks of Microsoft
Corporation in the United States and other countries.
•
AutoCAD is a trademark or registered trademark of Autodesk Incorporated in the United States
and other countries.
•
TrueType is a trademark or registered trademark of Apple Incorporated in the United States and
other countries.
•
Intel and Celeron are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the United States and other countries.
•
Other company and product names in this manual are trademarks or registered trademarks of
their respective owners.
■
Symbols Used in This Manual
•
Menus, icons, buttons, windows, tabs, and keys are indicated in brackets ([ ]).
Example: Click the [OK] button.
•
Cross-references are enclosed in quotations.
Example: See 3.2.1 "Marking Condition Settings" (p. 5).
Indicates instructions that must be followed to prevent hardware or software damage or
operating errors.
Indicates that incorrect operation may pose a risk of injury or damage.
Indicates additional information on a particular topic.