Amada ML-3015AS, Operation Manual, Page: 85 / 204

4 . Setting the Laser Light Output Schedule
85
ML-3030AS/3015AS
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
<Notes>
- The laser output value (%) setting range is 0 to 200% . However, the laser output
value cannot be set exceeding the maximum value of "PEAK POWER" x 100% . If
the laser output value is set to 100%, the value set in "PEAK POWER" is selected .
- There are limitations of the total time of the laser output time COOL1
+ COOL2 + FLASH3 in combination with values of PEAK POWER and
REPEAT . For details, refer to "Limitations of Schedule Setting" on page 100 .
- Within the range of 10% of the maximum peak power, a constant power is output
to protect the laser oscillator without reference to waveform input . For details,
refer to "Limitations of Schedule Setting" on page 100 .
SCHEDULE Screen (Flexible Waveform (FLEX))
How to see the displayed items
: Settable item
PEAK POWER
Sets the peak value of laser output (value when "POWER" are 100%). Regard-
ing the actual laser output value ("POWER"), set the ratio (%) to the peak value
supposing that the set peak value is the reference value (100%).
<Note>
The settable peak value of laser output differs depending on the model.
ML-3030AS: 0.5 to 2.7 kW / ML-3015AS: 0.25 to 1.35 kW
Scrolls the POINT display column of POINT 01 to POINT 20 to the right and left.
When a POINT is not displayed, press this button to display it.
POINT 01
·
·
·
POINT 20
Sets the laser output time and laser output value (POWER [%]) at each point of
"POINT 01" to "POINT 20."
<Note>
There are limitations of settable values in combination with values of PEAK
POWER and REPEAT. For details, refer to “Limitations of Schedule Setting” on
page 100.