Amada ML-3015AS, Operation Manual, Page: 73 / 204

3 . Changing the Equipment Settings
73
ML-3030AS/3015AS
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
PASSWORD Screen
On the PASSWORD screen, a password is set to protect the set welding schedule.
When the password is set and validated, set values are protected and cannot be
changed by any person other than the supervisor.
How to see the displayed items
: Settable item
SCHEDULE
EDIT
Displays the protection status, UNLOCK or LOCK.
At UNLOCK, schedules can be changed. At LOCK, it is impossible to
change schedules.
ENTER A
PASSWORD
When the input box is pressed, the keyboard is displayed and a password
can be entered.
X Returns to the CONFIG screen.
Protecting Set Values
The method of protecting set values by setting the password is explained be-
low .
1
Entering the Present Password
(1) Press the "PASSWORD" button on the CONFIG screen.
The PASSWORD screen appears.
(2) Press the password input box.
The keyboard appears.