Amada ML-3015AS, Operation Manual, Page: 50 / 204

50
ML-3030AS/3015AS
3 . Connecting the Laser Controller (Option)
3 . Connecting the Laser Controller (Option)
When using the laser controller as a remote controller, connect the cable.
CAUTION
Be sure to turn OFF the power supply before starting to connect the laser controller .
Item required
Laser controller and circuit cable
Operating Procedure
(1) Open the connector cover and disconnect the short circuit cable.
(2) Connect between the main unit and the laser controller by circuit cable.
⇒
The laser controller and circuit cable are options.
⇒
When the laser controller is connected, operations from the control panel are dis-
abled.
Connect Laser Controller to
[LASER CONT.OUT] connector
using circuit cable.
Laser Controller