Amada ML-3015AS, Operation Manual, Page: 28 / 204

28
ML-3030AS/3015AS
4 . Product Composition
Optical fiber
For ML-30□□AS-110, the optical fiber having a core diameter of φ 0.05 mm and
length of 4 m is connected.
For other models, any optical fiber of the followings is connected to the main unit
depending on the specification that you selected at the time of purchase. Dedicated
fibers with AR coat can be connected to this product. Do not connect other fibers.
Model Part name Core dia . Length
PO1178504 KVLKA2 AR2 ST100E 5m φ 0.1 mm 5 m
PO1178505 KVLKA2 AR2 ST100E 10m φ 0.1 mm 10 m
PO1178506 KVLKA2 AR2 ST200E 5m φ 0.2 mm 5 m
PO1178507 KVLKA2 AR2 ST200E 10m φ 0.2 mm 10 m
PO1175451 KVLKA2 AR2 ST300E 5m φ 0.3 mm 5 m
PO1175452 KVLKA2 AR2 ST300E 10m φ 0.3 mm 10 m
PO1175453 KVLKA2 AR2 ST400E 5m φ 0.4 mm 5 m
PO1175454 KVLKA2 AR2 ST400E 10m φ 0.4 mm 10 m
PO1175455 KVLKA2 AR2 ST600F 5m φ 0.6 mm 5 m
PO1175456 KVLKA2 AR2 ST600F 10m φ 0.6 mm 10 m
PO1177722 KVLKA2 AR2 ST800G 5m φ 0.8 mm 5 m
PO1177723 KVLKA2 AR2 ST800G 10m φ 0.8 mm 10 m
Output unit
The output unit with the specification that you selected at the time of purchase is con-
nected to the main unit. For details, refer to the Operation Manual or Specification for
the output unit.
⇒ As the spot diameter is bigger, the visibility of guide light becomes lower.
Options
The following goods are options separately sold. Purchase them as required.
Part name Model No .
Laser controller (with 1-m circuit cable) MLE-122A-15-00
Touch panel extension cable
5 m AS1162937
10 m AS1162938
15 m AS1162940
RS-232C/RS-485 conversion adapter MSC-08S
AC adapter for RS-232C/RS-485 conversion adapter Exclusively for MSC-08