Amada ML-2550A, Operation Manual

Page: 63 / 229

1. Setting Welding Schedules
63
ML-2550A/2551A
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Items and Buttons Common to Each Screen
The display items, setting buttons, and screen selecting buttons provided on the
following screens are common to the 6 types of basic screen.
How to See the Display Items and How to Use the Setting Buttons
: Settable item
SCHEDULE
Sets the SCHEDULE No. of laser light. Output conditions can be registered by
setting the 32 numbers of #00 to #31 or set schedule can be called.
The set schedule number is displayed on the button.
FORM Sets the waveform creating method.
When this button is pressed, a window to select "FIX" (fixed waveform) or "FLEX"
(flexible waveform) is displayed. Select a creating method by pressing an
optional button. The set method (FIX or FLEX) is displayed at the button.
PUMP
Displays the ON/OFF status of the pump to circulate cooling water.
WATER TEMP
Displays the temperature of cooling water.
HV
Sets the high voltage (HIGH VOLTAGE) to ON/OFF.
When this button is pressed, a window to select ON/OFF is displayed.
At ON, a high voltage is turned ON and the HIGH VOLTAGE lamp comes on.
At OFF, no high voltage is supplied and no laser light is output.
The set value (ON or OFF) is displayed at the button.
MAIN SHUT Sets the opening/closing status of the resonator shutter (MAIN SHUTTER).
When this button is pressed, a window to select ON/OFF is displayed.
At ON, the resonator shutter is opened and laser light can be output.
At OFF, the resonator shutter is closed. With the resonator shutter closed, the
flashlamp does not come on and no laser light is output.
The set value (ON or OFF) is displayed at the button.
Screen selecting
buttons
Display items and
setting buttons
Display items and
setting buttons