Amada ML-2350A-CE, Operation Manual, Page: 94 / 235

94
ML-2350A/2351A
1. Setting Welding Schedules
Protecting Set Values (PASSWORD Screen)
The method of protecting set values by setting the password is explained
below. When the password is set and validated, set values are protected and
cannot be changed by any person other than the supervisor.
1
Displaying the PASSWORD Screen
(1) Press the "PASSWD" button.
The PASSWORD screen appears.
2
Entering the Present Password
(1) Enter the set password into the password input box.
Press the password by pressing keyboard keys on the screen. The AC key
deletes all the entered characters. The BS key deletes a character in front of the
cursor one by one. The ENTER key is used to check the entered password for
correctness.
⇒ "REDS" is set as the initial value. To enter a new password after changing this
password, enter "REDS."
⇒
The password to be entered must consist of 4 alphanumerical characters.
(2) Press the ENTER key on the keyboard.
When the entered password is correct, the new password setting screen is
displayed.