Amada ML-2350A-CE, Operation Manual, Page: 108 / 235

108
ML-2350A/2351A
2. Setting the Laser Light Delivery
2 timesharings of 3-powersharing deliveries
Operating Branch Shutters on the STATUS Screen
In the following, the method of performing open/close operations for branch
shutters on the STATUS screen.
On the STATUS screen, perform open/close operations for branch shutters to transfer
laser light.
For this laser, the following 12 types of
sharing specification are available. The DIP
switches in the main unit are initially set according to the specifications provided at
delivery.
Sharing type
DIP switch (SW2) settings
5 6 7 8
Single OFF OFF OFF OFF
2-powersharing OFF OFF OFF ON
3-powersharing OFF OFF ON OFF
4-powersharing OFF OFF ON ON
2-timesharing OFF ON OFF OFF
3-timesharing OFF ON OFF ON
4-timesharing OFF ON ON OFF
5-timesharing ON ON OFF OFF
6-timesharing ON ON OFF ON
2 timesharings of
2-powersharing deliveries
OFF ON ON ON
3 timesharings of
2-powersharing deliveries
ON ON ON OFF
2 timesharings of
3-powersharing deliveries
ON ON ON ON
Laser light is reflected and branched on the front or rear beamsplitter by the operation of the timesharing unit.
The beams are simultaneously transmitted when branch shutters 1, 2, and 3 or 4, 5, and 6 are opened.
Branch shutter 6 Branch shutter 5 Branch shutter 4 Branch shutter 3 Branch shutter 2 Branch shutter 1
Beamsplitter
100%
Beamsplitter
50%
Timesharing
unit
100%
Laser light
Beamsplitter
33%
Beamsplitter
100%
Beamsplitter
50% Beamsplitter
33%