Amada MF-C300A-SF, Original Instructions Manual, Page: 101 / 199

5 . Monitoring Output
101
MF-C300A-SF/C500A-SF
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
SHOT COUNT Displays the total number of laser light outputs.
To reset the display to 0, perform a reset operation on the STATUS screen.
GOOD COUNT Displays the appropriate number of laser light outputs. The appropriate
number of outputs means the laser light output within the allowable energy
range set at "HIGH" and "LOW."
To reset the display to 0, perform a reset operation on the STATUS screen.
⇒ For the common items in the upper/lower part of the screen, refer to page 57.