Amada MF-C2000A Series, Operation Manual, Page: 12 / 272

12
MF-C2000A Series
Precautions for Handling
For Transportation
When transporting the laser, observe the following precautions to avoid
hazards .
⇒ Package the Laser when transporting it.
⇒
The worker must wear a helmet, safety shoes and gloves for safety. (Leather
gloves are recommended.)
⇒ When transporting the Laser, use a pallet truck of at least 300 kg allowable load.
⇒
Do not transport the Laser with its casters. The casters are for fine adjustment.
⇒
Retract the level adjuster fully when transporting the Laser.
Precautions for using a pallet truck
The following figure shows fork inserting positions.
⇒
As shown at right, adjust the distance between the forks; distance between the
outer sides of the forks must be 400 to 520 mm, but the fork must not hit the level
adjuster.
⇒ When transporting, belt the Laser to fix and keep it horizontal.
Figures below show example forking; insert the forks fully till the points appear from
under the Laser.
400 to 520
DO
DON'T
Fork
Fork