Push the memory card until it clicks into place, with the gold contacts
facing the back of the camera.
To eject, push the card lightly.
Do not remove or insert the card when the device is powered on. This
may damage the card.
Use class 6 or above micro SD card.
Format the card before initial use.
Slide the bracket into the camera’s connection, until you hear a click
Use only the supplied in car charger cable to power the camera and
charge the built-in battery.
Thank you for purchasing this On Dash
Cam. It is designed for real time video and
audio recording when driving.
Please read this guide carefully before
using your camera, and keep it for future
reference.
IMPORTANT:
Please register your camera
to receive firmware updates:
www.amacam.net
For technical support please contact us at
AMACAM
AM-C65
Auto Power On/Off
Once the vehicle engine is started,
the camera automatically powers
on and starts recording. When the
vehicle engine shuts down, the
camera automatically saves the
recording and turns off the power
within 10 seconds.
Manual Power On/Off
To manually turn on the power,
press the POWER button. The
camera turns on in STANDBY and
does not start to record.
To turn off, press and hold the
POWER button for at least 2
seconds.
PACKAGE CONTENTS
Note:
1. The red LED lights up while the battery is charging.
2. If the environment temperature reaches 45°C or above, the car
adapter can still supply power, but it will not charge the battery. This is
the characteristic of lithium polymer battery and is not a malfunction.
bracket connection
USB / power
Reset slot
Speaker
Lens
Microphone
Serial number
Screen
Memory card slot
Make sure that the lens is within the wiping range of the windshield
wiper to ensure a clear view even when it rains.
Installation on a tinted window may damage the window.
Connect the in car charger cable to the USB connector of the camera
and to the cigarette lighter socket of your vehicle.
in car
charger cable
AM-C65
On Dash
Cam
Bracket and
suction cup
USB cable
This User
Guide
In car charger
Power
button
INTRODUCTION
WINDSHIELD MOUNTING
Do not touch the lens with
your fingers. Clean the lens
regularly.
Loosen the knob to
swivel the camera, and
then re-tighten
Position the suction-cup
on the windshield near
the rear-view mirror and
where it will not obstruct
the driving view.
CONNECTING TO POWER
SWITCHING ON AND OFF
If the camera does not turn on, use a
toothpick to reset.
MEMORY CARD
Class 6 or above
micro SD card
Indicator
light
Manual editorial and design by
星灵美（深圳）
a Starling May International Company
Shenzhen, China
www.stmax.com.cn
