ALZA STORMRED PRO, User Manual

Page: 10 / 71

10
6.
Hold Spring Tool (H) overhand and pull spring hook towards Top rail (C) as picture shown; drop hook into frame
hole until it latches on completely, tap it down if hook is not completely in the hole.
Important:
Springs must be assembled on top rail in this right way around, and fully inserted into the hole on the top of the frame.
TOP TIP!
The placement of the next spring must be on the opposite side of frame, then center adjacent, then opposite. It must be
done this way so the tension of the spring is spread equality.
7. Lay Frame Cover (A) on outer edge, so springs are covered. It should be fitted like a shower cap. Please ensure it
covers all metal parts.
8. Tie the strap located at the under side of the Frame Cover to frame. Do not tie them to the springs.
Trampoline Ladder Assembly
Item No. Part Quantity Item No. Part Quantity
1 Ladder Step 2 pcs 4 Bolt 4 pcs
2 Frame Leg 2 pcs
3 Nut 4 pcs
1)
Place the two Frame Leg (2) on a clear area. Then, place one of the Ladder Steps (1) onto the bottom of each Frame Leg.
Next, slide the step up until the top bolt holes of the legs and step lineup.
Note: Make sure the checkered pattern of step is facing up.
2)
Insert two Bolts (4) through the Ladder Step (1) and Frame Legs (2). Then, tighten one Nut (3) on the back of each Bolt
by Screwdriver.
3)
Repeat steps 1 and 2 to assemble the second ladder step.