•
HPF
: This setting Controls the internal filtering of the noise generator, usually set to high
excepted for snare, you can tune this parameter like you want.
•
RES
: This is the SSM2044 VCF lowpass resonance, usually set to none on SDS-V, excepted for
snare; you can tune this parameter like you want.
•
CLICK Trigger Shape
: This is useful to emulate different type of trigger CV, Simmons pads
generates a richer trigger pulse than sequencer CV for example. This will affect the length of
the click; this parameter ranges from 78ms to 315ms. The reset button will restore factory
setting.
•
MOD amount
: This is the a Frequency Modulation amount, an LFO is available
per voice
(like
a super SDS3) the LFO can be set to a triangular or square output shape, the modulation is
applied to the VCO pitch (note that the snare has an additional switch which let you
additionally route the modulation to the VCF, in this case this is a pre-fader modulation ( full
modulation is sent regardless of the mod amount)
•
RATE:
This controls the speed of the LFO, the
divide
switch will set the frequency to a
low
range or a high range
.
All these parameters can really shape the sound in many ways; it is up to you to experiment!
TRIGGERS
